In the process of welding, welding robots will inevitably have the phenomenon of desoldering or false welding. In order to avoid this situation, what everyone can do is to take precautionary measures as soon as possible to minimize the occurrence of de-soldering or false welding. possibility.
Before the welding robot works, it is necessary to check the voltage and current first. To ensure that it is within the rated power of the machine, it must not be too high or too low, but the welding will definitely have an impact, only under normal circumstances. Use to ensure the effect.
The second thing to focus on is the parameter setting of the welding robot, which needs to be set in combination with different workpieces and different thicknesses. Especially regarding the welding speed of the welding robot, it should not be too fast, otherwise the welding quality will be affected, of course, it should not be too slow, not only will reduce the working efficiency, but also may cause large scars in the welded parts, and should ensure uniformity. Welding speed.
In fact, after the parameters of the welding robot are set, you can test it first, and only after passing the test can you join the production. In addition, the problem of the workpiece cannot be neglected, and the workpiece needs to be cleaned before processing to avoid the surface stain affecting the welding effect of the welding robot.
And if the welding robot itself has a fault, what should be done? First of all, you need to check the inside of the electrical control box to ensure that it is dry. If you find water or oil, do not turn it on. The second is to check the voltage and should be guaranteed at rated conditions.
Not only that but also check the flexibility of the rotating part of the welding robot, if it is found to be inflexible, then it must be caused by internal stains or lack of oil. Finally, the inspection of the safety door switch. If the safety door switch is in the open state, which is mainly caused by the failure of the motor, the motor needs to be disassembled for inspection and maintenance.
Address: Yuechang Hongtian Managerial Area, Xinxu Town, Huiyang, Huizhou, Guangdong, China.
Contact: Ms. Kary Hou
E-mail: [email protected]