Stainless steel spot welding machine is widely used in various industrial fields, such as automobiles and containers, because of its flexibility, simplicity, convenience, and reliability. I went to Baidu and made a summary with the advantages of the stainless steel spot welder I knew. I summed up five advantages. Let me introduce you to everyone below.
1. welding specifications
The response speed of the stainless steel spot welder is 1ms, the current can reach the set value faster, and the parameters can be analyzed more and more accurately. The three-phase balanced input has stable parameters; the constant current effect is very stable.
2. welding quality
Due to the frequency of up to 1000 Hz, the stainless steel spot welder has a strong secondary current output capability, and the waveform is straight, and the range of nucleation size stability is expanded. There is almost no splash, and the current in the primary stage of the welding is naturally increasing, and the surface quality of the solder joint is good.
Suitable for welding of a variety of materials, such as aluminum alloy and aluminum, such as aluminum, aluminum, and other materials with poor thermal conductivity can also be welded. For the welding of galvanized sheets and ordinary multi-layer boards, the welding quality is much higher than that of the power frequency welding machine.
4. the transformer
The transformer is small in size and low in input power.
5. energy efficiency
Three-phase load balancing, power factor up to 0.9 or more, energy-saving (according to the report of General Motors, MF spot welding saves 4 cents per weld compared to power frequency spot welding.
Address: Yuechang Hongtian Managerial Area, Xinxu Town, Huiyang, Huizhou, Guangdong, China.
Contact: Ms. Kary Hou
E-mail: [email protected]